Home / Products

Products

Conventional Pure Copper Lightning Arrester

→ To protect a home or building in the event of lightning a metal conductor or rod is mounted on the top of the building and electrically connected to the earth through a wire is known as conventional lightning rod (lightning conductor) or spike arrester. If lightning strikes it will preferentially strike the spike arrester, and be conducted harmlessly to ground through the wire, instead of passing through the building

ACCESSORIES OF LIGHTNING ARRESTERS

Lightning Strike Counter

→ The Lightning Strike Counter uses a 2-wire connection to any metal conductor for the detection of lightning induced voltage so conductor dimensions are unimportant. Unique in both operation and design. The Alywell Lightning Strike Counter unit captures up to 999,999 events before automatically resetting.

→ Suitable for either indoor or outdoor installation. To provide protection against extreme environmental conditions and hazards enclosures are built.

Earthing Rod Earth Bid cover , Earth Enhancing Material



→ The Earth Enhancing Compound has all the qualities of the ideal backfill material for an Earthing System. The basic purpose of the Earth Enhancing Compound is to reduce electrode to the soil resistance and to create a low resistance zone surrounding the electrode to provide a uniform environment so that the electrode output is constant. It maintains moisture within the sphere of influence of electrode. The Earth Enhancing Compound will cause the low soil resistivity around the electrode, which results in a significantly lower earth resistance.


Earth Pit Cover

→ Earth Pit Covers offer total protection and inspection point to earthing system in industrial and commercial applications. Environment friendly, heavy duty, weather proof and chemical resistance material of polyplastic has been used a raw material and an auto lock facility at the top is provided. The base unit of the earth pit cover has 2/4 knock-out openings for the routing/interconnecting of strips to form a GRID. It offers high mechanical strength, zero water absorption and resistant to sunlight rays.

→ Earth Pit Covers offer total protection and inspection point to earthing system in industrial and commercial applications. Environment friendly, heavy duty, weather proof and chemical resistance material of polyplastic has been used a raw material and an auto lock facility at the top is provided. The base unit of the earth pit cover has 2/4 knock-out openings for the routing/interconnecting of strips to form a GRID. It offers high mechanical strength, zero water absorption and resistant to sunlight rays.


Copper Bonded Grounding Rod

Copper Bonded Grounding Rods help in dissipating the fault current to help your assets being damaged from hazards of the same. These rods are manufactured according to the UL standard which is internationally accepted. The copper layer in these rods is extremely helpful in extreme soil conditions such as high salt or moisture content, where the copper provides high corrosion resistance and exceptionally long life to the steel rods. Grounding is necessary to eliminate electrostatic/dynamic discharge which can destroy sensitive equipment and disrupt power supply. Any voltage differences between individual electronic units can damage or destroy valuable equipment. Furthermore, noise can cause data output errors


Work Principles of the Copper Bonded Grounding Rod

→ Copper Bonded Grounding Rod effectively utilizes a hygroscopic process to acquire moisture from the atmosphere. The moisture and the nontoxic chemicals inside the electrode react and create an electrolytic solution leaches into the surrounding soil through ports that have been positioned in the electrode. This process improves the soil conductivity and dramatically reduces electrical resistance between the electrode and the earth.

→ Copper Bonded Grounding Rod also takes advantage of another benefit. The hole bored for the installation is back-filled with Earth Enhancing Compound, which also assists in substantially lowering the earth's resistance by creating a direct, low resistance, electrical connection between the electrode and the earth. The use of Earth Enhancing Compound will reduce impedance by increasing the effective contact area of the electrode to the soil. The earth enhancing compound is an easily applied product manufactured from environmentally safe and stable products. Each kit includes the Earth Enhancing Compound as the backfill material.


HVSC Down Conductor

→ Allywell offers the High Voltage Shielded Cable (HVSC) downconductor which is a high integrity low impedance cable. It is designed to convey lightning energy to ground with minimal risk of side flashing and structure electrification protects both personnel and sensitive electronic equipment from the devastating risks of a lightning strike. The design of the HVSC incorporates carefully selected dielectric components to ensure optimum performance under high impulses conditions; this design a low inductance per unit length with low surge impedance.